Building construction can be a tedious process which could go on for months or years depending on ones budget. Construction of a building typically starts with planning and designs by the architect through the clients requirements then it continues to financing the project until its built and ready for use. Most clients want to build a house that would reflect their personality but within an affordable budget and yet fit their personal aesthetic requirement, this could be a difficult task to achieve without taking measures to cut costs where necessary, this is why we have assembled a few tips to get you started.

 

Compare Proposals and Choose Wisely

Knowledge they say is power so therefore being informed before making any decision be it materials, styles and most especially the execution is very important to choose wisely. To properly do this you should get several proposals and quotas from different contractors and subcontractors which states their requirements for labour, supervision and materials with the price attached, this will enable you compare and contrast between them and choose wisely the one that fits into your budget and also get references to be sure that whomever you choose can deliver to the standard you require and to get a well-rounded picture of the person you are working with, this will help you avoid additional expenses to correct mistakes which might be incurred as a result of poor management by the contractor.

 

Improvise During Construction

There are several requirements and expectations that goes into a building among which include kitchen cabinets and wardrobes, these can cost you a lot if you are building them off-site then before installing them. However you can save a lot of money by building them on site yourself, with just minimal masonry and labour you could build a more sustainable kitchen cabinets and wardrobe then finish it with marble tiles or stones which looks amazing and would last longer than the wooden one made off-site.

 

Adapt Sustainable Execution

 

Sustainability is a term which saves you money in the long run, this is to say that sometimes its better to go spend money on quality material than save money on low quality materials that would require you spending subsequently on maintenance. To consider one must avoid anything that would incur unnecessary problems in the future since it not only reduces the quality of the building it also affects your investment.

The execution of stages like plumbing and electrical fittings could generate faults afterwards if not handled properly, for example we have noticed that conduit system of installation of plumbing fittings can be hard to maintain if need arises since breaking of the walls and patching it up destroys the aesthetic value of the building as well as the structural value. To avoid this however it is best to adapt the duct system during planning so that provision can be made for the plumbing withing the building where the pipes could pass through then later can be covered with aluminum louvers, that way it is neat and sustainable.

 

Seek Advice on Materials

Building materials today are of different types and from different companies, the market is filled with substandard products due to the fact that many companies reproduce materials made by other companies for a cheaper price but for lesser quality, so it would benefit you to make proper enquiries for professional advice on materials from contractors so they can recommend quality materials for good prices. In some cases these contractors or subcontractors can get you a better deal on bulk items such as lumber, paint and fittings since they may have a close relationship with the dealers.

 

Reuse Materials

In building construction materials can be salvaged and reused however possible, often materials that could be reused are wasted during stages of construction. Materials like lumber which serve several purpose in construction like formwork, scaffoldings, bracing etc can still be reused, for example planks used as formwork for floor slab could also be refused for lintels and beams thereby saving you extra cost on purchasing extra wood. The important thing to note is to be careful while removing the formwork so as not to damage them too badly.

 

Provide Your Own Water

A typical building construction site needs constant water for almost every activity so if you provide your own source of water without having to buy you will save a lot, you can do this by either digging a temporal well or digging a borehole. This source of water can also benefit you if you decide to mould your own masonry blocks on site, eventually it could be retained for use after the project is completed.

 

Security for Materials

Theft and vandalism is a common thing in construction industry so it would be wise to secure your materials beforehand, most people build a temporal storage room with either a container or built with roofing material. This will be used to store your materials till you finish the project, if however the storage is not serving its purpose perhaps you could hire a security personnel to guard the place.

 

Conclusion

When constructing your home it is very important not to go overboard. You gotta watch your capability and live within your budget but don’t cut corners that would have a long term negative impact on your property.

 

Please follow and like us:
Categories: ConstructionPractice

0 thoughts on “Tips on How to Save Money During Building Construction”

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Architecture

4 Elements Of A Wonderful Building Design

The design process is a very important component in the construction of a building whether it is a residential, commercial or an industrial building. At this stage, the architect/ designer conceptualizes the entire building and Read more…